[Journal Article]
First measurement of the surface tension of a liquid scintillator based on Linear Alkylbenzene (HYBLENE 113)
In: Journal of Instrumentation, 17 (5), T05012, 2022
[DOI: 10.1088/1748-0221/17/05/T05012]

SHiP SBT collaboration (Collaboration author)
Alt, J.
Arutinov, D.
Bezshyyko, O.
Bretz, Thomas
Brignoli, A.
Conaboy, A.
Deucher, P.
De Paola, F.
del Giudice, G.
di Cristo, C.
Fecarotta, O.
Fiorillo, A.
Fischer, H.
Glückler, H.
Grewing, C.
Hollnagel, A.
Lacker, H.
Miano, A.
Natour, G.
Orlov, V.
Prota, A.
Rehbein, Florian
Reghunath, A. (Corresponding author)
Salzano, A.
Schaaf, M.
Scharf, C.
Schmidt, J.
Schumann, M.
Vagts, A.
van Waasen, S.
Wurm, M.

[Contribution to a book, Journal Article]
Residual Stress Reduction with the LTT Effect in Low Carbon Manganese-Steel through Chemical Composition Manipulation Using Dissimilar Filler Material in Laser Beam Welding
In: Metals : open access journal, 12 (6), 911, 2022
[DOI: 10.3390/met12060911]

Akyel, Fatma Nur (Corresponding author)
Gamerdinger, Maximilian
Olschok, Simon
Reisgen, Uwe
Schwedt, Alexander
Mayer, Joachim

[Journal Article]
Curing Adhesives with Woven Fabrics Made of Polymer Optical Fibre and PET Yarn
In: Solid state phenomena, 333, 129-136, 2022
[DOI: 10.4028/p-a731y5]

Kallweit, Jan Philipp (Corresponding author)
Seewald, Robert Vitus
Pätzel, Mark
Schiebahn, Alexander
Reisgen, Uwe
Gries, Thomas

[Proceedings]
2nd International Conference on Advanced Joining Processes
In: Journal of advanced joining processes, 2022

da Silva, Lucas F. M. (Editor)
Martins, Paulo (Editor)
Reisgen, Uwe (Editor)

[Book, Dissertation / PhD Thesis]
Wirkungsweisen des Wasserstoffs beim Unterpulverschweißen von Feinkornbaustahl
In: Aachener Berichte Fügetechnik 3/2022, 2022

Christ, Martin Leonhard

[Journal Article]
Neue Vorhaben aus der klebtechnischen Forschung
In: Adhäsion: kleben & dichten, 66 (3), 40-51, 2022
[DOI: 10.1007/s35145-022-0568-0]

Beier, Christoph Jürgen Anton (Manually added Author)

[Contribution to a conference proceedings, Journal Article]
Adjustment of chemical composition with dissimilar filler wire in 1.4301 austenitic stainless steel to influence residual stress in laser beam welds
In: Journal of advanced joining processes, 5, 100081, 2021
[DOI: 10.1016/j.jajp.2021.100081]

Akyel, Fatma Nur (Corresponding author)
Gamerdinger, Maximilian
Olschok, Simon
Reisgen, Uwe
Schwedt, Alexander
Mayer, Joachim

[Contribution to a conference proceedings, Journal Article]
Improvement of the resistance spot welding of Al-Mg-Si alloys by using cladding technology: An optical and mechanical characterization study
In: Journal of advanced joining processes, 5, 100090, 2022
[DOI: 10.1016/j.jajp.2021.100090]

de Andrade Mato Grosso P Bamberg, Pedro (Corresponding author)
Seewald, Robert Vitus
Schiebahn, Alexander
Reisgen, Uwe
Precoma, Nico
Epperlein, Maike

[Journal Article]
Process development and mechanical properties of Ti-6Al-4V samples generated by laser material deposition with coaxial wire feed
In: Journal of laser applications : JLA, 34 (2), 022003, 2022
[DOI: 10.2351/7.0000491]

Kelbassa, Jana
Biber, Alexander
Steiner, Max Fabian

[Journal Article]
Estimation of the Incidence of Liquid Metal Embrittlement Crack in 3rd Generation Advanced High Strength Steel During Resistance Spot Welding using 2D and 3D Weld Lobe Curve
In: International Journal of Engineering Research and Technology : IJERT, 11 (3), 345-354, 2022
[DOI: 10.18154/RWTH-2022-03846]

Mathi, Santhosh
Schiebahn, Alexander
de Andrade Mato Grosso P Bamberg, Pedro (Corresponding author)
Reisgen, Uwe

[Journal Article]
Untersuchungen zu Umformeigenschaften rührreibgeschweißter Mischverbindungen
In: Schweißen und Schneiden, 74 (3), 132-140, 2022

Rabe, Pascal (Corresponding author)
Kordtomeikel, Roman
Reisgen, Uwe
Schiebahn, Alexander
Hirt, Gerhard
Bailly, David

[Journal Article]
Increase in Understanding of the welding process through simulation of laser beam and gas-shielded metal arc welding
In: Welding and Cutting, 21 (1), 56-63, 2022

Mokrov, Oleg
Simon, Marek Sebastian
Sharma, Rahul (Corresponding author)
Reisgen, Uwe
Schöler, Christoph
Nießen, Markus
Schulz, Wolfgang

[Journal Article]
Model description of hydrogen-induced damage evolution in high-strength steel weld metal based on results of a novel test method
In: Materials science & engineering / A, 840, 142905, 2022
[DOI: 10.1016/j.msea.2022.142905]

Christ, Martin Leonhard (Corresponding author)
Reisgen, Uwe
Sharma, Rahul
Mäde, Konrad Arno Gregor
Angerhausen, Matthias

[Journal Article]
Utilisation of the X-ray emission of an electron beam capillary for visualisation of the beam-material interaction
In: Materials testing = Materialprüfung, 64 (2), 151-160, 2022
[DOI: 10.1515/mt-2021-2126]

Gach, Stefan (Corresponding author)
Reisgen, Uwe
Olschok, Simon
Jakobs, Stefan

[Book, Proceedings]
2nd International Conference on Advanced Joining Processes (AJP 2021) : selected contributions of AJP 2021
In: Proceedings in engineering mechanics, 2022
[DOI: 10.1007/978-3-030-95463-5]

da Silva, Lucas F. M. (Editor)
Martins, Paulo A. F. (Editor)
Reisgen, Uwe (Editor)

[Contribution to a conference proceedings]
Zerstörungsfreie Zustandsüberwachung von elastischen und strukturellen Klebungen unter Zug- und Scherbeanspruchung durch Integration einer optischen Polymerfaser
In: [22. Kolloquium - Gemeinsame Forschung in der Klebtechnik, 2022-02-15 - 2022-02-16, Online Event], 108, 2022

Weiland, Josef
Michael, Luber
Schiebahn, Alexander
Olaf, Ziemann
Rainer, Engelbrecht
Reisgen, Uwe

[Journal Article]
Application and benchmark of SPH for modeling the impact in thermal spraying
In: Computational particle mechanics : CPM, 9, 1137-1152, 2022
[DOI: 10.1007/s40571-022-00459-9]

Jeske, Stefan Rhys (Corresponding author)
Bender, Jan Stephen
Bobzin, Kirsten
Heinemann, Hendrik
Jasutyn, Kevin
Simon, Marek Sebastian
Mokrov, Oleg
Sharma, Rahul
Reisgen, Uwe

[Book, Dissertation / PhD Thesis]
Neues Fügeverfahren für Kunststoff-Metall-Hybridstrukturen
In: Aachener Berichte Fügetechnik 1/2022, 2022
[DOI: 10.18154/RWTH-2022-01438]

Lotte, Jens Jacob Georg

[Dissertation / PhD Thesis]
Charakterisierung und Experimentelle Validierung von 3D-druckbarem Elastomer-Polymer als Phantommaterialien für Hybride Medizinische Bildgebungstechnologien, 2022
[DOI: 10.18154/RWTH-2022-00821]

Talalwa, Lotfi

[Contribution to a book, Journal Article]
Quality prediction of disturbed ultrasonic metal welds
In: Journal of advanced joining processes, 5, 100086, 2021
[DOI: 10.1016/j.jajp.2021.100086]

Müller, Florian Werner (Corresponding author)
Schiebahn, Alexander
Reisgen, Uwe

[Contribution to a book, Journal Article]
Deep learning approaches for force feedback based void defect detection in friction stir welding
In: Journal of advanced joining processes, 5, 100087, 2021
[DOI: 10.1016/j.jajp.2021.100087]

Rabe, Pascal (Corresponding author)
Schiebahn, Alexander
Reisgen, Uwe

[Contribution to a book, Journal Article]
Simulation of transient heat transfer and phase transformation in laser beam welding for low alloy steel and studying its influences on the welding residual stresses
In: Journal of advanced joining processes, 5, 100080, 2021
[DOI: 10.1016/j.jajp.2021.100080]

Krishna Murthy, Karthik Ravi (Corresponding author)
Akyel, Fatma Nur
Reisgen, Uwe
Olschok, Simon

[Journal Article]
Validation of evaporation-determined model of arc-cathode coupling in the peak current phase in pulsed GMA welding
In: Journal of physics / D, 55 (10), 105204, 2021
[DOI: 10.1088/1361-6463/ac3daa]

Simon, Marek Sebastian (Corresponding author)
Mokrov, Oleg
Sharma, Rahul
Reisgen, Uwe
Zhang, Guokai
Goett, Gregor
Uhrlandt, Dirk

[Journal Article]
A methodology for detection of crack initiation in adhesively bonded joints under constant and variable amplitude fatigue loading
In: The journal of adhesion, 98 (6), 758-779, 2021
[DOI: 10.1080/00218464.2021.1992278]

Gastens, Markus (Corresponding author)
Sadeghi, Mohammadzamaan
Weiland, Josef
Reisgen, Uwe
Schröder, Kai-Uwe

[Contribution to a book, Journal Article]
A mesoscopic analysis of cavities in two components silicone adhesive with cylindrical butt joint specimens
In: International journal of adhesion and adhesives, 117, Part B, 103016, 2021
[DOI: 10.1016/j.ijadhadh.2021.103016]

Seewald, Robert Vitus (Corresponding author)
Schnittcher, Marc André
Pauly, F.
Rath, S.
Schaaf, Benjamin
Lamm, Lukas Adrian
Schiebahn, Alexander
Brepols, Tim
Reese, Stefanie
Feldmann, Markus
Reisgen, Uwe

[Contribution to a book]
Development of a reference system for the evaluation of magnetic fields in resistance spot welding applications
In: 41. Assistentenseminar Füge- und Schweißtechnik : Vorträge der gleichnamigen Veranstaltung in Magdeburg vom 3. bis 4. September 2020 / Institut für Schweißtechnik und Fügetechnik, RWTH Aachen, Institut für Werkzeugmaschinen und Fabrikbetrieb, Technische Universität Berlin, Institut für Füge- und Schweißtechnik, Technische Universität Braunschweig, Institut für Füge- und Montagetechnik, Technische Universität Chemnitz [und 3 weitere] ; vom Institut für Werkstoff- und Fügetechnik/Lehrstuhl Fügetechnik der Otto-von-Guericke Universität veranstaltet, 1-9, 2021

de Andrade Mato Grosso P Bamberg, Pedro (Corresponding author)
Reisgen, Uwe
Schiebahn, Alexander
Klußmann, Jonas
Kubocz, M.
Jagielski, K.

[Journal Article]
Schweißtechnik 4.0: Digitalisierte vernetzte schweißtechnische Fertigung - Konzepte und Anwendungen (Teil 2)
In: Schweissen und Schneiden, 73 (4), 235-238, 2021

Middeldorf, Klaus
Aumüller, Dominik
Bergmann, Jean Pierre
Mann, Samuel Micha (Corresponding author)
Sharma, Rahul
Reisgen, Uwe

[Journal Article]
Herstellung von Kunststoff/Metall-Hybridbauteilen durch das Hinterspritzen von widerstandsgeschweißten Metallgeweben
In: Joining plastics, 15 (1), 34-40, 2021

Wurzbacher, Simon (Corresponding author)
Wagner, Pia
Hopmann, Christian
Lotte, Jens Jacob Georg
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Parameter Study on the Effects of Spot-welding on the Electromagnetic Properties of Magnetic Cores Constructed from Electrical Steel
In: 2021 11th International Online Conference Electric Drives Production Conference (EDPC) : 7 and 9 December 2021, 9 Seiten, 2021
[DOI: 10.1109/EDPC53547.2021.9684225]

Ukwungwu, David
Krichel, Thomas
Schauerte, Benedikt
Leuning, Nora
Olschok, Simon
Reisgen, Uwe
Hameyer, Kay

[Journal Article]
Modelling and prediction of welding parameters for electron beam welding and laser beam welding in vacuum
In: Welding and cutting, 20 (4), 328-333, 2021

Krichel, Thomas (Corresponding author)
Reisgen, Uwe
Olschok, Simon

[Contribution to a conference proceedings]
Laser in Vacuum spot welding of electrical steel sheets with 3.7% Si-content
In: Lasers in Manufacturing Conference 2021 : LiM 2021 / WLT, Wissenschaftliche Gesellschaft Lasertechnik e.V., 1-7, 2021

Krichel, Thomas (Corresponding author)
Olschok, Simon
Reisgen, Uwe

[Conference Presentation, Contribution to a conference proceedings]
FiberKleb - Einsatz von optischen Polymerfasern zur Härtung strahlungshärtender Klebstoffe durch radikalische Polymerisation unter Verwendung von strahlungsintransparenten Substraten
In: [21. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2021-03-02 - 2021-03-03, Online Event, Germany], 25 Slides, 2021

Seewald, Robert Vitus (Corresponding author)
Kallweit, Jan Philipp
Schiebahn, Alexander
Gries, Thomas
Reisgen, Uwe

[Contribution to a conference proceedings]
SmartSHM - Effiziente Zustandsüberwachung struktureller Klebungen
In: [21. Kolloquium "Gemeinsame Forschung in der Klebtechnik", 2021-03-02 - 2021-03-03], 3 Seiten, unpaginiert, 2021

Weiland, Josef (Corresponding author)
Sadeghi, Mohammadzamaan
Gastens, Markus
Janetzko-Preisler, Andreas
Schiebahn, Alexander
Schröder, Kai-Uwe
Reisgen, Uwe

[Contribution to a book, Journal Article]
Development of a Multidirectional Wire Arc Additive Manufacturing (WAAM) Process with Pure Object Manipulation : Process Introduction and First Prototypes
In: Journal of manufacturing and materials processing, 5 (4), 134, 2021
[DOI: 10.3390/jmmp5040134]

Parmar, Khushal (Corresponding author)
Oster, Lukas Emmanuel
Mann, Samuel Micha
Sharma, Rahul
Reisgen, Uwe
Schmitz, Markus
Nowicki, Thomas
Wiartalla, Jan Tobias
Hüsing, Mathias
Corves, Burkhard

[Abstract, Contribution to a conference proceedings]
Improvement of the resistance spot welding and weld bonding of Al-Mg-Si alloys by using cladding technology: An optical and mechanical characterization study
In: Book of abstracts of the 2nd International Conference on Advanced Joining Processes AJP2021, 2021

de Andrade Mato Grosso P Bamberg, Pedro (Corresponding author)
Seewald, Robert Vitus
Schiebahn, Alexander
Reisgen, Uwe
Precoma, Nico
Epperlein, Maike

[Journal Article]
A revolução industrial do alumínio no setor automotivo
In: Revista Aluminio, 1-10, 2021

de Andrade Mato Grosso P Bamberg, Pedro

[Contribution to a conference proceedings]
Process control of aluminum-copper mixed joints during laser beam welding in vacuum
In: Lasers in Manufacturing Conference 2021 : LiM 2021 / WLT, Wissenschaftliche Gesellschaft Lasertechnik e.V., 8 Seiten, 2021

Reisgen, Uwe
Olschok, Simon
Holtum, Willem Niklas
Frey, Christian (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Nasses Unterwasserschweißen von Kehlnähten - eine Herausforderung bei Einsatz hochfester Stähle
In: [Katharina Braun Veranstaltung: 41. Assistentenseminar Fügetechnik, 2021-09-02 - 2021-09-02, Magdeburg, Germany], 8 Seiten, 2021

Reisgen, Uwe
Sharma, Rahul (Corresponding author)
Braun, Katharina

[Website]
Métodos de união de materiais para ligas de alumínio automotivas
In: Revista Aluminio, 13 Seiten, 2021

de Andrade Mato Grosso P Bamberg, Pedro (Corresponding author)

[Book]
DVS-Studie Entstehung von Schweißrauch beim Metallschutzgasschweißen
In: DVS Berichte 377, 2021

Ebert, Benjamin Jonas
Marek, Simon
Mann, Samuel Micha
Sharma, Rahul (Corresponding author)
Reisgen, Uwe

[Journal Article]
Serielles Plasma-MSG-Hybridschweißen von Aluminiumwerkstoffen
In: Schweissen und Schneiden, 73 (11), 780-785, 2021

Reisgen, Uwe
Sharma, Rahul (Corresponding author)
Zokoll, Erik
Olivares Gonzalez, Erick

[Contribution to a conference proceedings]
Potentials and Boundaries of Laser Treatment of Glass Fiber Reinforced Polymers for Adhesive Bonding
In: [Korean Conference on Surface Technology in Material, SurfCon Korea 2021, 2021-11-04 - 2021-11-05, Seoul, South Korea], 83-108, 2021

Beier, Christoph Jürgen Anton (Corresponding author)
Reisgen, Uwe
Schiebahn, Alexander

[Journal Article]
Development of a new approach to resistance spot weld AW-7075 aluminum alloys for structural applications: an experimental study - Part 1
In: Journal of materials research and technology, 15, 5569-5581, 2021
[DOI: 10.1016/j.jmrt.2021.10.142]

de Andrade Mato Grosso P Bamberg, Pedro (Corresponding author)
Gintrowski, Gregor Georg
Liang, Zeqin
Schiebahn, Alexander
Reisgen, Uwe
Precoma, Nico
Geffers, Christoph

[Abstract, Contribution to a book, Contribution to a conference proceedings]
Quality prediction of disturbed ultrasonic metal weldings
In: Book of abstracts of the 2nd International Conference on Advanced Joining Processes AJP2021 : 21-22 October, 2021, 49, 2021

Müller, Florian Werner (Corresponding author)
Reisgen, Uwe
Schiebahn, Alexander
Weil, S.
Corves, Burkhard
Mirz, Christian Jascha

[Abstract, Contribution to a book, Contribution to a conference proceedings]
Investigation of the electrical power at ultrasonic metal welding and its potential use for process monitoring
In: Book of abstracts of the 2nd International Conference on Advanced Joining Processes AJP2021 : 21-22 October, 2021, 134, 2021

Reisgen, Uwe
Hensen, C.
Müller, Florian Werner (Corresponding author)
Siebt, R.
Schiebahn, Alexander

[Contribution to a book, Contribution to a conference proceedings]
Investigation of the Cleaning Effectiveness of Laser Radiation for Improved Adhesion on Glass Dust Contaminated Glass Fiber Reinforced Polyamide 6
In: 6th International Conference on Adhesive Bonding 2021 : Selected Contributions of AB 2021 / edited by Lucas F. M. da Silva, Robert D. Adams, 103-113, 2021
[DOI: 10.1007/978-3-030-87668-5_7]

Beier, Christoph Jürgen Anton (Corresponding author)
Seewald, Robert Vitus
Dittmar, H.
Weiland, Josef
Schiebahn, Alexander
Jaeschke, P.
Overmeyer, L.
Reisgen, Uwe

[Contribution to a conference proceedings]
Influence of Laser Metal Deposition Process Parameters on Geometric Accuracy and Residual Stress of IN718 Thin-walled Structures
In: [Metal Additive Manufacturing Conference 2021, MAMC, 2021-11-03 - 2021-11-05, Vienna, Austria], 103-112, 2021

Bold, Marie-Noemi
Stich, Jannik
Schleifenbaum, Johannes Henrich
Akyel, Fatma Nur
Reisgen, Uwe

[Contribution to a conference proceedings, Journal Article]
Individualized and controlled laser beam pre-treatment process for adhesive bonding of fiber-reinforced plastics. III. Effects of contaminants
In: Journal of laser applications : JLA, 33 (4), 042051, 2021
[DOI: 10.2351/7.0000466]

Dittmar, Hagen (Corresponding author)
Beier, Christoph Jürgen Anton
Weiland, Josef
Schiebahn, Alexander
Jaeschke, Peter
Kaierle, Stefan
Reisgen, Uwe
Overmeyer, Ludger

[Contribution to a conference proceedings, Journal Article]
Influence of the laser beam parameters in the laser assisted double wire welding with nontransferred arc process on the seam geometry of generatively manufactured structures
In: Journal of laser applications : JLA, 33 (4), 042044, 2021
[DOI: 10.2351/7.0000521]

Bokelmann, Tjorben (Corresponding author)
Tegtmeier, Marijan
Lammers, Marius
Hermsdorf, Jörg
Kaierle, Stefan
Emadmostoufi, Sobhan (Corresponding author)
Mokrov, Oleg
Sharma, Rahul
Reisgen, Uwe

[Abstract, Contribution to a conference proceedings]
Polymer optical fibre tape fabrics for UV-curing adhesives
In: Aachen-Dresden-Denkendorf : International Textile Conference : Digital Event, November 9-10, 2021 : Book of abstracts / Organization: Textil- und Faserforschung Denkendorf (DITF), DWI-Leibniz-Institut für Interaktive Materialien, Aachen, ITM, Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden. - Scientific Board - Wissenschaftlicher Beirat: Bayram Aslan, Michael R. Buchmeiser, Chokri Cherif, Andreas Fery, Götz T. Gresser, Thomas Gries, Jochen Gutmann, Stefan Hecht, Andreas Herrmann, Heike Illing-Günther, Maike Rabe, Fabian Schreiber, Mathias Ulbricht, Lutz Vossebein, Poster 44, 193-193, 2021

Seewald, Robert Vitus (Corresponding author)
Lingemann, Monika
Kallweit, Jan Philipp
Pätzel, Mark
Schiebahn, Alexander
Reisgen, Uwe
Gries, Thomas