Publications
Showing 1 - 50 of 1975 Results
-
SourceAuthor(s)
-
[Journal Article]
Non-destructive evaluation of the friction stir welding process, generalizing a deep neural defect detection network to identify internal weld defects across different aluminum alloys
In: Welding in the world, none, none, 2023
[DOI: 10.1007/s40194-022-01441-y]Rabe, P. (Corresponding author)
Reisgen, U.
Schiebahn, A. -
[Journal Article]
Influence of working pressure on laser beam welding in vacuum of electrical steel sheets
In: Vacuum : surface engineering, surface instrumentation & vacuum technology, 207, 111659, 2022
[DOI: 10.1016/j.vacuum.2022.111659]Krichel, Thomas (Corresponding author)
Olschok, Simon
Reisgen, Uwe -
[Journal Article]
An optimized microchannel Ta target for high-current accelerator-driven neutron sources
In: Nuclear instruments & methods in physics research / A, 1045, 167508, 2022
[DOI: 10.1016/j.nima.2022.167508]Ding, Qi (Corresponding author)
Rücker, Ulrich
Zakalek, Paul
Baggemann, Johannes
Wolters, Jörg
Li, Jingjing
Beßler, Yannick
Gutberlet, Thomas
Brückel, Thomas
Natour, Ghaleb -
[Contribution to a book, Contribution to a conference proceedings]
Strain Monitoring of a Structural Adhesive Bond by Embedding a Polymer Optical Fiber
In: European Workshop on Structural Health Monitoring : EWSHM 2022 / Piervincenzo Rizzo, Alberto Milazzo editors. - Volume 1, 745-754, 2022
[DOI: 10.1007/978-3-031-07254-3_75]Weiland, Josef (Corresponding author)
Luber, Michael
Rostan, Katharina
Schiebahn, Alexander
Engelbrecht, Rainer
Reisgen, Uwe -
[Contribution to a conference proceedings, Journal Article]
Modal Distribution in Polymer Optical Fibers as Sensor for Load Monitoring in Semi-Structural Adhesive Bonds
In: [Optical Fiber Sensors, Alexandria, Virginia], 2022
[DOI: 10.1364/OFS.2022.W2.3]Engelbrecht, R. (Corresponding author)
Rostan, K.
Weiland, J.
Luber, M.
Schiebahn, A.
Reisgen, U. -
[Dissertation / PhD Thesis]
Entwicklung glasbasierter Dichtungsmaterialien für das Fügen von Sauerstofftransportmembranen, 2022
[DOI: 10.18154/RWTH-2023-00593]Li, Xinfang -
[Journal Article]
Aushärtung radikalisch härtender UV-Klebstoffe durch den Einsatz polymeroptischer Fasern
In: Schweissen und Schneiden, 74 (12), 820-828, 2022Seewald, Robert Vitus (Corresponding author)
Kallweit, Jan Philipp (Corresponding author)
Pätzel, Mark (Corresponding author)
Schiebahn, Alexander (Corresponding author)
Gries, Thomas (Corresponding author)
Reisgen, Uwe (Corresponding author) -
[Journal Article]
Application of electrical power measurements for process monitoring in ultrasonic metal welding
In: Welding in the world, 21 Seiten, 2022
[DOI: 10.1007/s40194-022-01428-9]Müller, Florian Werner (Corresponding author)
Chen, Chun-Yu
Schiebahn, Alexander
Reisgen, Uwe -
[Contribution to a book, Contribution to a conference proceedings]
Koaxiales Laser Lichtbogen Hybridschweißen als additives Verfahren COLLAR Hybrid AM
In: DVS Congress 2022: große schweißtechnische Tagung, DVS Campus, Kurzfassungen der Vorträge der Veranstaltung in Koblenz vom 19. bis 21. September 2022 : (Langfassungen der Beiträge auf USB-Karte) / Veranstalter: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf, 129-134, 2022Steiner, Max Fabian
Meyer, Patrick
Rießner, Lukas Robert
Clemens, Michael Theodor
Olschok, Simon
Kelbassa, Jana
Thomas, Schopphoven
Haefner, Constantin Leon -
[Contribution to a book, Contribution to a conference proceedings]
Experimental setup for laser vibrometry measurements of the vibrating horn in Ultrasonic Metal Welding
In: inter.noise 2022 : 21-24 August Scottish Event Campus, Glasgow : proceedings, 12 Seiten, 2022Abi Raad, Elie (Corresponding author)
Müller, Florian Werner
Reisgen, Uwe
Vorländer, Michael -
[Journal Article]
Direction-independent laser-GMA hybrid welding with coaxial wire feed and annular beam
In: Welding in the world, 2022
[DOI: 10.1007/s40194-022-01427-w]Clemens, Michael Theodor (Corresponding author)
Warnecke, Lucas
Olschok, Simon
Reisgen, Uwe
Steiner, Max Fabian -
[Dissertation / PhD Thesis]
Entwicklung glasbasierter Dichtungsmaterialien für das Fügen von Sauerstofftransportmembranen, 2022
[DOI: 10.18154/RWTH-2022-10883]Li, Xinfang -
[Book, Dissertation / PhD Thesis]
Modellgestützte Determinierung der Strahlcharakteristika beim Elektronenstrahlschweißen und ihre Auswirkung auf das Prozessresultat
In: Aachener Berichte Fügetechnik 4/2022, 2022
[DOI: 10.18154/RWTH-2022-10651]Stüßer-Ufer, Sebastian -
[Journal Article]
Investigation on the feasibility of strain measurement by in situ neutrondiffraction in the area of the weld pool during welding
In: Forces in Mechanics, 9, 100139, 2022
[DOI: 10.1016/j.finmec.2022.100139]Sharma, Rahul (Corresponding author)
Hofmann, Michael
Reisgen, Uwe -
[Journal Article]
Experimental study of measures preventing welders from fume exposure
In: Welding in the world, 20 Seiten, 2022
[DOI: 10.1007/s40194-022-01395-1]Egerland, Stephan (Corresponding author)
Wiesinger, M.
Sharma, Rahul
Ebert, Benjamin Jonas -
[Contribution to a conference proceedings, Journal Article]
Laser beam quality welds - Learning from other processes
In: Procedia CIRP, 111, 401-404, 2022Olschok, Simon (Corresponding author)
Engels, Oliver
Clemens, Michael Theodor
Jakobs, Stefan
Krichel, Thomas
Frey, Christian
Jarwitz, Michael -
[Journal Article]
Target preparation of low-pressure cold-sprayed metal powder coatings to create defined micro-leakage
In: Practical metallography, 59 (10), 615-627, 2022
[DOI: 10.1515/pm-2022-0057]Kappertz, M. (Corresponding author)
Hoven, C.
Pauly, F.
Lohoff, R.
Natour, Ghaleb -
[Contribution to a conference proceedings, Journal Article]
Extension of the process limits for laser beam welding in vacuum of thick-walled steel sheets
In: Procedia CIRP, 111, 453-456, 2022
[DOI: 10.1016/j.procir.2022.08.062]Krichel, Thomas (Corresponding author)
Olschok, Simon
Reisgen, Uwe -
[Contribution to a book, Contribution to a conference proceedings]
Festigkeitsbewertung hochfester Schweißverbindungen anhand von Querzugversuchen
In: DVS Congress 2022: große schweißtechnische Tagung, DVS Campus, Kurzfassungen der Vorträge der Veranstaltung in Koblenz vom 19. bis 21. September 2022 : (Langfassungen der Beiträge auf USB-Karte) / Veranstalter: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf, 670-677, 2022Reisgen, Uwe
Sharma, Rahul
Christ, Martin Leonhard (Corresponding author)
Mäde, Konrad Arno Gregor
Münstermann, Sebastian
Dölz, Michael
Tekkaya, Berk -
[Contribution to a conference proceedings, Journal Article]
Extension of the process limits for laser beam welding in vacuum of thick-walled stell sheets
In: Procedia CIRP, 111, 453-456, 2022Krichel, Thomas (Corresponding author)
Olschok, Simon
Reisgen, Uwe -
[Journal Article]
Schlieren methodology for laser beam welding under vacuum
In: Vacuum : surface engineering, surface instrumentation & vacuum technology, 206, 111508, 2022
[DOI: 10.1016/j.vacuum.2022.111508]Reisgen, Uwe
Olschok, Simon
Twiehaus, Thorsten (Corresponding author)
Frey, Christian -
[Contribution to a book, Contribution to a conference proceedings]
Widerstandsschweißen - Webbasiertes System zum Bewerten der Magnetfeldexposition
In: DVS Congress 2022: große schweißtechnische Tagung, DVS Campus, Kurzfassungen der Vorträge der Veranstaltung in Koblenz vom 19. bis 21. September 2022 : (Langfassungen der Beiträge auf USB-Karte) / Veranstalter: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf, 421-423, 2022Kubocz, M. (Corresponding author)
Gräfrath, D.
Kraus, T.
Schiebahn, Alexander
de Andrade Mato Grosso P Bamberg, Pedro (Corresponding author)
Klußmann, Jonas -
[Contribution to a book, Contribution to a conference proceedings]
Widerstandspunktschweißen von Mischverbindungen an Bauteilen aus Aluminiumknet- und Aluminiumdruckgusslegierungen
In: DVS Congress 2022: große schweißtechnische Tagung, DVS Campus, Kurzfassungen der Vorträge der Veranstaltung in Koblenz vom 19. bis 21. September 2022 : (Langfassungen der Beiträge auf USB-Karte) / Veranstalter: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf, 42-48, 2022Epperlein, Maike (Corresponding author)
de Andrade Mato Grosso P Bamberg, Pedro
Schiebahn, Alexander
Reisgen, Uwe -
[Contribution to a book, Contribution to a conference proceedings]
Strahlschweißen im Vakuum - Vermeiden von Bauteilverschmutzung und Oxidation beim Schweißen korrosionsbeständiger Stähle und Refraktärmetalle
In: DVS Congress 2022: große schweißtechnische Tagung, DVS Campus, Kurzfassungen der Vorträge der Veranstaltung in Koblenz vom 19. bis 21. September 2022 : (Langfassungen der Beiträge auf USB-Karte) / Veranstalter: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf, 842-851, 2022Twiehaus, Thorsten
Olschok, Simon
Reisgen, Uwe -
[Contribution to a book, Contribution to a conference proceedings]
Richtungsunabhängiges Laser-MSG-Hybridschweißen mit Ringfokus und koaxialer Drahtzuführung für das Verbindungsschweißen und die additive Fertigung
In: DVS Congress 2022: große schweißtechnische Tagung, DVS Campus, Kurzfassungen der Vorträge der Veranstaltung in Koblenz vom 19. bis 21. September 2022 : (Langfassungen der Beiträge auf USB-Karte) / Veranstalter: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf, 730-736, 2022Steiner, M. F.
Clemens, Michael Theodor (Corresponding author)
Olschok, Simon
Reisgen, Uwe
Kelbassa, J.
Schopphoven, Thomas
Haefner, C. L. -
[Contribution to a book, Contribution to a conference proceedings]
Elektronenstrahlschweißen - Erweitern der Prozessüberwachung durch Optimieren der In-Prozess-Sensorik
In: DVS Congress 2022: große schweißtechnische Tagung, DVS Campus, Kurzfassungen der Vorträge der Veranstaltung in Koblenz vom 19. bis 21. September 2022 : (Langfassungen der Beiträge auf USB-Karte) / Veranstalter: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf, 601-610, 2022Reisgen, Uwe
Olschok, Simon
Gach, Stefan (Corresponding author)
Pfaffenrot, Matthias
Krichel, Thomas -
[Journal Article]
Investigating mechanical properties of laser beam weld seams with LTT-effect in 1.4307 and S235JR by tensile test and DIC
In: Procedia CIRP, 111, 420-424, 2022Gamerdinger, Maximilian (Corresponding author)
Akyel, Fatma Nur
Olschok, Simon
Reisgen, Uwe -
[Contribution to a conference proceedings, Journal Article]
Experimentelle Untersuchungen zur Erfassung von Kavitäten hyperelastischer Silikonklebstoffe
In: ce/papers : the online collection for conference papers in civil engineering, 5 (3), 87-100, 2022
[DOI: 10.1002/cepa.1868]Schaaf, Benjamin (Corresponding author)
Feldmann, Markus (Corresponding author)
Lamm, Lukas Adrian (Corresponding author)
Brepols, Tim (Corresponding author)
Reese, Stefanie (Corresponding author)
Seewald, Robert Vitus (Corresponding author)
Schiebahn, Alexander (Corresponding author)
Reisgen, Uwe (Corresponding author) -
[Journal Article]
ProKleb : Alterungsverhalten der Klebung von unterschiedlich kontaminiertem, glasfaserverstärktem PA6 nach Laserstrahlbehandlung
In: Joining plastics (2), 108-114, 2022Beier, Christoph Jürgen Anton (Corresponding author)
Schiebahn, Alexander
Reisgen, Uwe
Dittmar, Hagen
Jäschke, Peter
Kaierle, Stefan
Overmeyer, Ludger
Weiland, Josef -
[Journal Article]
Untersuchungen zu den Gebrauchseigenschaften und Verfahrensgrenzen des thermischen Direktfügens
In: Joining plastics, k.A. (2), 100-107, 2022Schoft, Julia
van der Straeten, Kira Martina
Reisgen, Uwe
Schiebahn, Alexander (Corresponding author) -
[Journal Article]
Proof of concept to analyze process emissions during laser beam welding at different ambient pressures
In: Procedia CIRP, 111, 547-550, 2022Frey, Christian (Corresponding author)
Olschok, Simon
Reisgen, Uwe
Sawannia, Michael
Weber, Rudolf -
[Contribution to a conference proceedings, Journal Article]
Laser beam quality welds - Learning from other processes
In: Procedia CIRP, 111, 401-404, 2022
[DOI: 10.1016/j.procir.2022.08.175]Olschok, Simon (Corresponding author)
Engels, Oliver
Clemens, Michael Theodor
Jakobs, Stefan
Krichel, Thomas
Frey, Christian
Jarwitz, Michael -
[Journal Article]
Robustness and reliability assessment of single-sided spot welding as a process for sheet to closed profile joining for body in white vehicle structures
In: Welding international, 36 (6), 331-343, 2022
[DOI: 10.1080/09507116.2022.2079440]de Andrade Mato Grosso P Bamberg, Pedro (Corresponding author)
Gintrowski, Gregor Georg
Reisgen, Uwe
Schiebahn, Alexander -
[Book, Dissertation / PhD Thesis]
Hybridization between plasma and MIG processes in a tandem configuration for aluminum joints
In: Aachener Berichte Fügetechnik 2/2022, 2022
[DOI: 10.18154/RWTH-2022-08232]Gonzalez Olivares, Erick Alejandro -
[Contribution to a book, Contribution to a conference proceedings]
Measurement Routine for Analysing the Thermal Impact of Additive Manufacturing Processes on Deformation
In: ITSC 2022 : International Thermal Spray Conference and Exposition May 4 - 6, 2022 Vienna, Austria : conference abstracts (including proceedings on USB stick) / organizers: DVS - German Welding Society, ASM International - Thermal Spray Society (TSS), IIW - International Institute of Welding, 226-232, 2022
[DOI: 10.31399/asm.cp.itsc2022p0226]Mäde, Konrad Arno Gregor (Corresponding author)
Oster, Lukas Emmanuel
Bold, Marie-Noemi
Reisgen, Uwe
Schleifenbaum, Johannes Henrich -
[Journal Article]
Characteristics of high-frequency pulsed current arc with refractory cathode
In: The Paton welding journal, 2022 (3), 9-18, 2022
[DOI: 10.37434/tpwj2022.03.01]Krivtsun, I. (Corresponding author)
Demchenko, V.
Krikent, I.
Reisgen, Uwe
Mokrov, Oleg
Sharma, Rahul -
[Patent]
Verfahren für die generative Fertigung von Bauteilen, 2022Mann, Samuel Micha
Oster, Lukas Emmanuel
Reisgen, Uwe
Sharma, Rahul -
[Contribution to a conference proceedings, Journal Article]
Special issue: 2nd international conference on advanced joining processes 2021 (AJP 2021)
In: Journal of advanced joining processes, 5, 100105, 2022
[DOI: 10.1016/j.jajp.2022.100105]da Silva, Lucas F. M. (Corresponding author)
Martins, Paulo
Reisgen, Uwe -
[Journal Article]
Impact of welding simulated heat treatment on hydrogen embrittlement behavior of high-strength fine-grained steels
In: Engineering Failure Analysis, 140, 106602, 2022
[DOI: 10.1016/j.engfailanal.2022.106602]Guo, Xiaofei
Li, Tianyi
Sheng, Zhendong (Corresponding author)
Christ, Martin Leonhard (Corresponding author)
Sharma, Rahul
Söker, Marcus
Reisgen, Uwe
Bleck, Wolfgang -
[Journal Article]
Influence of residual oxygen during laser beam welding under vacuum
In: Materials Testing, 64 (7), 945-953, 2022
[DOI: 10.1515/mt-2021-2183]Twiehaus, Thorsten (Corresponding author)
Olschok, Simon
Reisgen, Uwe -
[Journal Article]
Comparison of penetration depth in bead-on-plate welds of thick-walled steel sheets with Laser Beam Welding in Vacuum and Electron Beam Welding
In: Vacuum : surface engineering, surface instrumentation & vacuum technology, 203, 111314, 2022
[DOI: 10.1016/j.vacuum.2022.111314]Krichel, Thomas (Corresponding author)
Reisgen, Uwe
Olschok, Simon -
[Journal Article]
Systemidentifikation und Monitoring von Metall-Ultraschallschweißprozessen
In: Schweissen und Schneiden, 74 (5), 268-275, 2022Müller, Florian Werner (Corresponding author)
Schiebahn, Alexander
Mirz, Christian Jascha
Weil, Sascha
Corves, Burkhard -
[Contribution to a book, Journal Article]
Residual Stress Reduction with the LTT Effect in Low Carbon Manganese-Steel through Chemical Composition Manipulation Using Dissimilar Filler Material in Laser Beam Welding
In: Metals : open access journal, 12 (6), 911, 2022
[DOI: 10.3390/met12060911]Akyel, Fatma Nur (Corresponding author)
Gamerdinger, Maximilian
Olschok, Simon
Reisgen, Uwe
Schwedt, Alexander
Mayer, Joachim -
[Journal Article]
Curing Adhesives with Woven Fabrics Made of Polymer Optical Fibre and PET Yarn
In: Solid state phenomena, 333, 129-136, 2022
[DOI: 10.4028/p-a731y5]Kallweit, Jan Philipp (Corresponding author)
Seewald, Robert Vitus
Pätzel, Mark
Schiebahn, Alexander
Reisgen, Uwe
Gries, Thomas -
[Proceedings]
2nd International Conference on Advanced Joining Processes
In: Journal of advanced joining processes, 2022da Silva, Lucas F. M. (Editor)
Martins, Paulo (Editor)
Reisgen, Uwe (Editor) -
[Book, Dissertation / PhD Thesis]
Wirkungsweisen des Wasserstoffs beim Unterpulverschweißen von Feinkornbaustahl
In: Aachener Berichte Fügetechnik 3/2022, 2022Christ, Martin Leonhard -
[Journal Article]
Neue Vorhaben aus der klebtechnischen Forschung
In: Adhäsion: kleben & dichten, 66 (3), 40-51, 2022
[DOI: 10.1007/s35145-022-0568-0]Beier, Christoph Jürgen Anton (Manually added Author) -
[Contribution to a conference proceedings, Journal Article]
Adjustment of chemical composition with dissimilar filler wire in 1.4301 austenitic stainless steel to influence residual stress in laser beam welds
In: Journal of advanced joining processes, 5, 100081, 2021
[DOI: 10.1016/j.jajp.2021.100081]Akyel, Fatma Nur (Corresponding author)
Gamerdinger, Maximilian
Olschok, Simon
Reisgen, Uwe
Schwedt, Alexander
Mayer, Joachim -
[Contribution to a conference proceedings, Journal Article]
Improvement of the resistance spot welding of Al-Mg-Si alloys by using cladding technology: An optical and mechanical characterization study
In: Journal of advanced joining processes, 5, 100090, 2022
[DOI: 10.1016/j.jajp.2021.100090]de Andrade Mato Grosso P Bamberg, Pedro (Corresponding author)
Seewald, Robert Vitus
Schiebahn, Alexander
Reisgen, Uwe
Precoma, Nico
Epperlein, Maike -
[Journal Article]
Process development and mechanical properties of Ti-6Al-4V samples generated by laser material deposition with coaxial wire feed
In: Journal of laser applications, 34 (2), 022003, 2022
[DOI: 10.2351/7.0000491]Kelbassa, Jana
Biber, Alexander
Steiner, Max Fabian